Europe Chippers EC 1175
BASE UNIT EC 1175 - STANDARD CONFIGURATION
| Power (Diesel/Electro/PTO) | 480 - 770 HP (315-400kW) |
| Output | Up to 200 m3/h |
| Max log diameter Ø | 65 cm |
| Weight (subject to configuration) | 18,0 - 22,0 tons |
| Width | 2.53 m |
| Infeed opening wxh | 1.100 x 750 mm |
| Drum diameter Ø including knives | 1.000 mm |
| No. of knives | 6 pcs. |
| Counterknife, usable at 2 sides | 1 pce. |
| No. of screens (70/90/110) mm) | 2 pcs. |
| Replaceable wear plates | Standard |
| 1x Hydraulic top feed roll with single drive system, adjustable speed and mounted in heavy duty steel bearing houses | Standard |
| 1x hydraulic bottom feed roll with single drive system, adjustable speed and mounted in heavy duty steel bearing houses | Standard |
| Automatic feed system with no stress | Standard |
| Europe Controller with PLC, c/w view chipper data, parameter settings of chipper functions, colour display and proportional valves | Standard |
| Chip blower, directly driven by drum axle, 3/6 replaceable blower paddles | Standard |
| Variochip | Standard |
| Long discharge pipe with discharge height 5 m, 360° hydraulically rotatable chute including hyd. flipper adjustment, including wear plates | Standard |
BASE UNIT - OPTIONS
- Sidefeed
- Vertical side rollers for branches
- Bottom discharge for stationary set-up
- Discharge conveyor belt
- Radio Remote Control
- Flexxaire reversing fan
FEED OPTIONS
- Hydraulically open infeed chain (x2) mounted on 90°/180° hydraulically foldable table. The double open infeed chain sorts out sand and rocks and improve lifetime of wear parts inside the chipper.
- Stationary table with open chain (x2), with double the length of mobile chipper table. The double open infeed chain sorts out sand and rocks and improve lifetime of wear parts inside the chipper.
POWER OPTIONS
- CATERPILLAR engine C 13 TIER IV Final 480 HP
- CATERPILLAR engine C 18 TIER III 770 HP
- Clutch, cooler and pump drive are included in all engines
- Electric motor providing 315 kW c/w hydraulic power pack – no starters
- Electric motor providing 400 kW c/w hydraulic power pack – no starters
CRANE OPTIONS
- Europe Forestry Crane 4580: capacity 4,5 ton, reach 8,0 meter, assembley to chipper by crane mounting plate, grapple 200 with max opening 1100 mm, c/w rotator, electric oil cooler, double legs in the front and in the rear with individual levers.
- Europe Forestry Crane 10095: capacity 10 ton, reach 9,5 meter, assembley to chipper by crane mounting plate, grapple 310 with max opening 1500 mm, c/w rotator, electric oil cooler, double legs in the front and in the rear with individual levers.
CABIN - Cabin normal, including radio, cd, wiper, ventilator and seat
- Cabin deLuxe, including airco, heating, remote display, control of chipper, 1200 mm height adjustable, 2 working lamps, 2 foot pedals and 2 levers.
Controls - Mechanical controllers, ERGO
- Electricall controllers (Joysticks) plus 6 pcs. DANFOSS PVG32 for load sensing pump
TRANSPORT OPTIONS
- Tandemaxle 24 ton, 40 km/h, hydraulic brake and spring suspension
- 80 km/h road legal chassis, air brakes and GERMAN TÜV certificate
- Container twist lock system
- Truck mount frame, anti-torsion
- Hooklift frame plus cable system
- 2-speed steel tracks, 60 cm wide, 30 tons, including rubber pads and radio remote control for tracks
